FCS Capacitor Switch

The Farady’s new generation FCS capacitor switch is a special electrical field design on vacuum interrupter and switch body insulation for switching capacitive current. integrated with single or three phase pole mounted capacitor bank to be reactive power compensation.

Email your specs

Detail

General

The Farady’s new generation FCS capacitor switch is a special electrical field design on vacuum interrupter and switch body insulation for switching capacitive current. integrated with single or three phase pole mounted capacitor bank to be reactive power compensation.

With long mechanical and electrical life design can provides an operational life of over 100,000 maintenance-free operations.

Using the FCS will result in substantial savings from reduced maintenance and maximized bank uptime and will also improve Power Quality.

The FCS all comply with relative standard ANSI C37.66/IEC62271


Service condition

Ambient temperature: -40℃~+85℃, day temperature difference: 25℃;

Altitude: Below 2000m(special condition pls contact Farady Technical);

Wind speed no exceeds 35m/s;

No normally intensity vibration

No intensity erosion gas, medium place (for example acid, alkali, smother eg.)

Pollution class: IV class;

Charge temperature -40℃~+85℃。


Feature

With optional choice by Normal type and magnetic actautor mechanism.

1.jpg 

Magnetic actuator operate mechanism

This advanced design monostable type magnetic actuator. With mechanical life 100,000 times.
     Intelligence capacitor switch controller

 

1-1.jpg 

 

Spring mechanism available

Manual trip/Close

Can be manual trip by hook sticker.

Open/Close indicator

Visible from ground


With optional classes for rated current range:

For 15/27/38kV, with 630A, Max 50kA making capacity. Normal current 1250A is optional.

With optional communication protocols & I/O port for user choice:

RS-232 and RS-485 ports supporting.

Modbus communication protocol is optional(*need special order)

IEC 60870-5-101 communication protocol support.

The Capacitor switch can communicate through GPRS(Or GSM) modem with English(need

*special order)

Note: (*) mean should customized by manufacturer if needed.


Accessories of FCS

2.jpg 

2-1.jpg 

2-2.jpg

Upper terminal Insulator cover 3 pcs/set

Lower terminal Insulator cover 3 pcs/set

Lower expanding bushing 3 pcs/set

 

2-3.jpg 

2-4.jpg

Upper terminal 3 pcs/set

Lower terminal 3 pcs/set


Note: Standard made of T2 copper material, for 630A rated current using. With expanding range.


Main new advantages of FCS capacitor switch

                                High reliable manual operation device                                                                 High reliable manual closing device

3.jpg

                                                        Visible ON/OFF indicator                                       IP65 class waterproof plug connector


Note:

Farady Supply special design manual closing device technology with own patent, It applied for normal and abnormal situation closing. Its closing speed(time) comply with IEC62271-100

This function can offset from magnetic actuator fault which when actuator can’t work will cause the major accident.


4.jpg

Primary incomer terminal (directly connect to interrupter reduce power lost)

Vacuum interrupter (with APG technology with external silicone rubber mold pressure covering, increasing the whole insulation and weathering performance)

Outlet bushing (external modular design easy for quality control and maintenance)


Apply ANSOFT design the high-performance magnetic actuator, high reliable and free maintenance. Through 35,000 times opening reverse excitation test, the demagnetization rate less than 1%.


5.jpg

Note:

Farady supply special patent modular design mono-stable type magnetic actuator with two coils controlling. Its the best design for vacuum FCS caps witch.


Main technical parameter

Main technical data of the FCS

No.

Item

Unit

Data

1

Rated voltage

KV

15/27/38

2

Rated current

A

200 up to 630

3

Rated frequency

HZ

50/60

4

Power frequency 1min

Dry

KV

50/70/95

Wet

45/65/80

5

Lightning impulse withstand voltage(peak value)alternate, opposite/fracture

KV

110/150/170/200

6

Rated short circuit breaking current

KA

12.5/16/20

7

Symmetrical fault-making current

KA

12.5/16/20

8

Rated peak value withstand current

KA

31.5/40/50

9

Symmetrical short time withstand current

KA

12.5/16/20

10

Rated operating circulates


O-0.3S-CO-3S-C
     ( 3S minimum )

11

Single capacitor breaking

A

630

12

Back to back capacitor bank breaking

A

400

13

Mechanism life

times

10,000/100,000

Note: (*) is meant special for optional. When needed should discuss with our engineer.

Exceeds Electrical Requirements of ANSI C37.66


Creepage Distances of FCS capacitor switch

Description

15kV BIL
     90kV

27kV BIL
     150kV

38kV BIL
     170kV

38kV BIL
     200kV

T to T*

470

840

1140

1250

T to G/E*

500

1020

1200

1300

Note:

T to T* Terminal to terminal creepage

T to G/E* Terminal to ground/earth creepage

This figure does not include lower expanding bushing


Outline & Sizes for FCS

6.jpg

Reference dimensions for 15kV FCS capacitor switches.


7.jpg

Reference dimensions for 27kV FCS capacitor switches.


Capacitor switch controller features

8.jpg

Offering:

1, ON/OFF signal light 

2, Alarm(fault) light

3,Open&Close push button 

4,Batteries

5,Capacitor 

6, MCB

7,power Inverter 

8,Intelligence Control device 

9,Rotate switch

10, Auxiliary switch contacts 

11, Cable connector

12, Terminals

13, Others


Specification of components:

1, ON&OFF signal light

ON signal light red color,OFF light Green. Power from inner controller.

2, Alarm(fault)light

Yellow color. Power from inner controller Power from inner controller.

Power from inner controller. 

3, Open&Close push button

Open push button Green color. Close push button Red color. Power from inner controller.

Note: For remote controlling can set additional circuit loop, power from outside. detail see secondary diagram.

4,Batteries, 2pcs

12Vdc,7AH/pcs

Close push button Red color. Power from inner controller. 

5,Capacitor,1pcs

250Vdc, 22000uF.

6, MCB, 2poles 1pcs, 1poles 1pcs.

AC220Vac, 16A.

for protection and switching.

7,Power inverter, capacitive battery /1pcs. Capacitive type, 24Vdc exchange to 250Vdc.. battery inverter accordingly outside power.

8, Intelligence control device 1pcs.

For switching controlling coils. 9, Rotate switch,220Vac 1pcs.

Control for remote circuit or local circuit. 10, Auxiliary switch contacts

Backup for clients. 220Vac, 10A.

Note: Others pls contact with Farady’s Engineers.


Note: (*) Standard equipped with only terminal or ON/OFF controller, special design must be customized


Outline & Sizes for FCS capacitor switch controller

9.jpg