Auto Recloser

Email your specs

Features and Benefits


Farady Electric strives to bring our customers the latest technology and competitive pricing and best service for pole mounted Auto circuit recloser

The FAR series Auto circuit recloser can use on overhead distribution lines as well as distribution substation applications for all voltage classes 11kV up to 38kV at 50/60HZ power system. And its rated current can reach 1600A.

The FAR series Auto circuit recloser integrates the functions of control, protection, measurement,communication,fault detection,on-line monitoring of closing or opening.comply to IEC62271 and ANSI/IEEE C37.60 standard

Service Environment

a) Air temperature: Maximum temperature: +85℃; Minimum temperature:-45℃

b) Humidity: Monthly average humidity 95%; Daily average humidity 90% .

c) Altitude above sea level: Maximum installation altitude: 2500m or more higher.

d) Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.

e) No frequent violent shake

Technical Data


Product Structure




Voltlogic-351 series recloser controller is medium voltage overhead line grid monitoring unit, It can combined with vacuum circuit breaker for achieve of automatic reclose, measure monitoring, fault analysis and event records. It gives us a safety power grid for cutting line fault and automatic recovery operation and power automation.

The controller is suitable for up to 40.5kV outdoor switchgear using, include: vacuum circuit breakers, oil circuit breakers and gas circuit breakers.

The controller column switch intelligent controller supports: Wireless (GSM/GPRS/CDMA), Ethernet mode, WIFI, optical fiber, power line carrier, RS232/485, RJ45 and other forms of communication, and can access other station premises equipment (such as TTU, FTU, DTU, etc.).

Protection functions ANSI code Name in Device
Phase overcurrent 50P P.OC
Overload 49 Overload
Phase Time-Overcurrent 51P P.Curve
Ground Overcurrent 50G/N E.F
Recloser 79 Reclose
Phase overcurrent cold load pick-up CLPU 50 Cold Load
Switch-Onto-Fault SOTF
Undervoltage 27 Under volt
Overvoltage 59 Over volt


Project Reference